Product Description

Thermoplastic road marking paint for sale

Description:

Thermoplastic road marking paint consists of petropols, EVA, PE wax, fillers materials, which is solid powder condition at normal temperature. If it is heated to 100-200℃ by heat fusing pot under construction, it will appears flowage, coating

The paint to the road surface will form hard film. It has full line type, strong wearing resistance and other characteristics. Sprinkling reflecting glass micro beads on the surface under construction, it has good reflecting effect at night. It is widely applied in highway and road .According to the environment used and the different construction requirements , we can supply different types of paint for our customer option.

Features:

☆Strong adhesion strength：Resin content is reasonable, and it was added special rubber elastomer in the primer, so it has strong adhesion strength. If the construction technique is reasonable, there is no peeling off.

☆Good cracking resistance: Thermoplastic line-marking is easy to form crack because of the temperature variation of thermoplastic line-marking. Adding enough EVA to the paint can prevent cracking.

☆Bright color: The paint adopts the color of the highest level with reasonable proportion, so it has good weather resistance and will not change color if long term exposure.

☆High usage ratio: The major feature of point is low density ,big volume and high usage ratio.

☆Good dirt resistance: The dosage and quality of PE wax are the key point of impacting the dirt resistance. PE wax of Exxon is our first choice for many years.

Application:

Suitable for highway, municipal roads, road, the actual line, guide arrow, text, parking lot parking line, factory ,etc

Technical data:

1. Density: 105g/cm3

2. Softening point: 105℃

3. Water resistance: no unusual phenomenon in water in 24 hours

4. Alkali resistance: no unusual phenomenon in The saturated solution of calcium hydroxide in 24 hours

5. Compressive strength: >=12Mpa

6. Abrasion performance: < 80

7.Fluidity: 35±10

8. Drying time: 3 min

9. Color: yellow or white for option

Payment Terms︰ TT/LC

Packing︰ plastic wrap, plywood case, free fumigation, standard export packing. as shown below. Or customized

Lead Time︰ in stock. common type 7 working days after confirm

Standards Certificate︰ CE ISO

Product Image