Automatic CLC blocks production line
CLC is cellular light weight concrete, has been used in over 40 countries over the past year for build houses, apartments, schools, hospitals, industrial buildings etc.
New building material foam concrete block featurs:
*Low Cost *Light Weight
*Heat Preservation *Sound Insulation
*Fireproofing *Aseismatic
*High Construction Speed *Environmental Protection
Main machines for making CLC blocks include: GM2000 foam concrete mixer, GH76/65/GH50 foam concrete pump, wire cutting machine. In this configuration, could improve foam concrete bricks produce efficiency.
GM2000 foam concrete mixer
The foam concrete mixer mainly includes mixer, feeder hopper, foam generator, water pump, control panel, tank.
Features:
1. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.
2. Specially mixing blades, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.
3. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy.
Main technical data sheet:
| Model |
GM2000 |
| Production Capacity |
15-20 m3/h |
| Output Volume |
1500 L |
| Material Input Volume |
2000 L |
| Main Shaft Revolution |
32 r/min |
| Hopper Lifting speed |
22 m/min |
| Mixing Motor |
11 kW |
| Winding Motor |
5.5 kW |
| Water Pump Motor |
1.1 kW |
| Vibrating Motor |
0.55 kW |
| Foaming System |
5.5 kW |
| Max. Moving Speed |
15 km/h |
| Total Weight |
3200 kg |
| Overall Dimension |
2600x2250x3000 mm |
| GH76/65/50 foam concrete pump for option |
|
|
Features:
- No valves
- Self-priming
- Only tube to replace
- Spiral bevel gear SEW series
- Mainly consists pump house, rotor, idel rotor, squeeze tube, and driving unit
- Easy maintance, low cost, short down time
|
Model
|
GH76
|
GH65
|
GH50
|
|
Output
|
20m3/h
|
10-15 m3/h
|
8-10 m3/h
|
|
Max. theoretical conveying pressure
|
1.5MPa
|
1.5Mpa
|
1.5Mpa
|
|
Hose ID(mm)
|
76
|
65
|
50
|
|
Rotation
|
42r/min
|
42r/min
|
35r/min
|
|
Max. aggregate Dia ( mm )
|
15mm
|
12
|
10
|
|
Max. Suct.Left ( m )
|
5
|
5
|
5
|
|
Motor Power (kw)
|
18.5kw
|
11
|
7.5
|
Wire cutting machine:
| Name |
GW 30B Wire Cutting Machine |
| Electric Motor （Kw） |
2.2 kw*1 set, 0-56r/min
adjusted
750w*2 set, 0-560r/min
adjusted
|
| Effective hoisting height |
700mm |
|
Cutting
plantform size ( L*W*H)
|
1240*1240*225mm |
| Net cutting size (L*W*H) |
1200*1200*600mm |
| Cutting cycle |
60-180seconds |
| Overall dimension (L*W*H) |
2160*2060*2280mm |
| Total weight |
1100kg |
It is specially used to cut various foam concrete blocks. Easy operation, high efficiency. The block size between 100-200-300-400-500-600-700-800-900-1000-1100-1200mm could be adjusted willfully.
Production capacity
| 0.8643M3 |
600*200*75mm |
96 pcs/mould |
| 0.8643M3 |
600*200*100mm |
72 pcs/mould |
| 0.8643M3 |
600*200*150mm |
48 pcs/mould |
| 0.8643M3 |
600*200*200mm |
36 pcs/mould |
| 0.8643M3 |
600*200*300mm |
24 pcs/mould |
1. Could cut a block in two directions simultaneously at one time (cutting machine made by blade can cut only one direction and buyer must use two machines to cut one block in two times)
2. Cutting one block need 3-4 minutes, so max cutting capacity could up to 17 m3/hour
mould size and bricks size also could be customized according to your demands
