GZ-9 is large-sized shotcrete machine for the spraying process.
GZ-9 can be used for large-section tunnel building, mine, etc
GZ-9 is available in following versions:
Basic: electric drive can be combined with tyre chassis
Extended (optional): Air motor drive or diesel drive combined with Skid or Rail-wheel
GZ-9E Dry-mix shotcrete machine technical data :
|
Output Capacity
|
9m3 /h
|
|
Max. Horizontal Conveying Distance
|
200m
|
|
Suitable Mix Ratio(Cement/Sand)
|
≤1:4~5
|
|
Max. Aggregate Size
|
Dia.20 mm
|
|
Conveying Hose Inner Diameter
|
Dia.64 mm
|
|
Conveying Pressure
|
0.2-0.4MPa(29-58PSI)
|
|
Air Consumption
|
10~12m3/min(357-430CFM)
|
|
Material Charging Height
|
1.1m
|
|
Rotor Speed
|
11r/min
|
|
Electric Motor
|
7.5kW,Y132M-4,IP55
|
|
Vibrator Electric Motor
|
0.15kW,XVM-A1.5-2
|
|
Available Voltage
|
220V,380V, 440V,660V 50Hz/60Hz
|
|
Overall Dimension(length×width×height)
|
1.65×0.9×1.25m
|
|
Net Weight
|
900kg
|
GZ-9E concrete spraying machine advantages:
1. High quality, reliable performance.
2. Good seal performance, little dust.
3. Reasonable design, convenient to move.
4. Convenient operation and longevity of service.
5. Non-adhesion going-through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
6. Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.
7. Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dusk leak and prolong consumption parts life.
8. Widely used in mining, tunnel, culvert, revetment etc.
Contact Supplier:
Many thanks for visiting our web, we can supply shotcrete machine for you. Before we send quotation, please let me know the following question:
1. What's the project you will use the machine do, for slope protect, or other?
2. Do you need dry-mix shotcrete machine or wet-mix shotcrete machine?
3. What's the output you need, 3m3/h, 5m3/h, 9m3/h, or other?
4. What's the maximum particle size of the material, less than 10mm, 15mm, or 20mm?
5. About the engine, do you need air motor, electric or diesel ? What voltage it is on your local? It is 3 phase 380V 50Hz in China.
We have many standard models for your option, and we also could customize as per your requirement. Please tell us your requirements and we will provide you with the corresponding product parameters and quotations. If you have any questions, please contact us.
